Description
BENTLY NEVADA ARM-1813-00GE AC POWER SUPPLY 3500/15 85-264VAC 是本特利内华达（Bently Nevada）公司生产的一款交流电源模块，专为 3500 系列监测系统设计。以下是该电源模块的主要技术参数：
1. 输入电压范围
- 电压范围：85VAC 至 264VAC
- 频率范围：47Hz 至 63Hz
- 输入类型：单相交流电
2. 输出特性
- 输出电压：通常为 24VDC（具体输出电压需参考产品手册，因模块可能为 3500 系统机架内的电源分配提供支持）。
- 输出电流：支持 3500 系统机架内多个模块的供电需求，具体电流容量需结合系统配置。
- 输出稳定性：高精度稳压输出，确保系统稳定运行。
3. 电源类型
- 冗余设计：支持 1+1 冗余配置，可安装两个电源模块以提高系统可靠性。
- 热插拔功能：支持在线热插拔，便于维护和更换。
4. 物理特性
- 尺寸：标准 3500 系列机架安装尺寸（具体尺寸需参考产品手册）。
- 重量：轻量化设计，便于安装和搬运。
- 安装方式：DIN 导轨安装或机架安装。
5. 环境适应性
- 工作温度范围：-20°C 至 +70°C（具体范围需参考产品手册）。
- 存储温度范围：-40°C 至 +85°C。
- 相对湿度：5% 至 95%，无冷凝。
- 防护等级：符合工业环境使用要求，具备一定的防尘和防水能力。
6. 安全与认证
- 安全标准：符合 CE、UL、CSA 等国际安全认证标准。
- 电磁兼容性：符合 EN 61000 系列标准，具备良好的抗电磁干扰能力。
7. 兼容性
- 系统兼容性：专为 Bently Nevada 3500 系列监测系统设计，兼容 3500 框架内的所有模块。
- 软件兼容性：支持 Bently Nevada 的 System 1 状态监测软件及其他相关软件平台。
8. 特性与优势
- 高可靠性：采用工业级元器件，具备长寿命和高稳定性。
- 宽电压输入：支持全球范围内的电压输入，适应不同地区的电网环境。
- 冗余设计：支持冗余电源配置，确保系统在单个电源故障时仍能正常运行。
- 易于维护：热插拔功能使得电源模块的更换无需停机，减少维护时间。
9. 应用领域
- 发电厂：用于汽轮机、发电机等关键设备的状态监测。
- 石油化工：用于压缩机、泵等旋转机械的振动监测。
- 钢铁冶金：用于轧机、风机等设备的故障预警。
- 水处理：用于水泵、阀门等设备的运行状态监测。
10. 注意事项
- 安装前检查：确保输入电压与电源模块的额定电压范围匹配。
- 接地要求：必须正确接地，以确保设备安全和电磁兼容性。
- 维护建议：定期检查电源模块的工作状态，确保风扇正常运行，避免过热。
BENTLY NEVADA ARM-1813-00GE AC POWER SUPERY 3500/15 85-264VAC is an AC power module produced by Bently Nevada, specifically designed for the 3500 series monitoring system. The following are the main technical parameters of the power module:
1. Input voltage range
Voltage range: 85VAC to 264VAC
Frequency range: 47Hz to 63Hz
Input type: single-phase AC power
2. Output characteristics
Output voltage: Typically 24VDC (specific output voltage should refer to the product manual as the module may provide support for power distribution within the 3500 system rack).
Output current: Supports the power supply requirements of multiple modules within the 3500 system rack, and the specific current capacity needs to be combined with the system configuration.
Output stability: High precision stabilized output ensures stable operation of the system.
3. Power type
Redundancy design: Supports 1+1 redundancy configuration and can install two power modules to improve system reliability.
Hot plug function: Supports online hot plug for easy maintenance and replacement.
4. Physical characteristics
Dimensions: Standard 3500 series rack installation dimensions (specific dimensions should refer to the product manual).
Weight: Lightweight design, easy to install and transport.
Installation method: DIN rail installation or rack installation.
5. Environmental adaptability
Working temperature range:- 20 ° C to+70 ° C (specific range to refer to product manual).
Storage temperature range:- 40 ° C to+85 ° C.
Relative humidity: 5% to 95%, no condensation.
Protection level: meets the requirements for industrial environment use and has certain dust and water resistance capabilities.
6. Security and authentication
Safety standards: comply with international safety certification standards such as CE, UL, CSA, etc.
Electromagnetic compatibility: Complies with the EN 61000 series standards and has good resistance to electromagnetic interference.
7. Compatibility
System compatibility: Designed specifically for Bently Nevada 3500 series monitoring systems, compatible with all modules within the 3500 framework.
Software compatibility: Supports Bently Nevada’s System 1 status monitoring software and other related software platforms.
8. Characteristics and advantages
High reliability: using industrial grade components with long lifespan and high stability.
Wide voltage input: Supports global voltage input and adapts to different regional power grid environments.
Redundant design: Supports redundant power configuration to ensure that the system can still operate normally in the event of a single power failure.
Easy to maintain: The hot swappable function allows for the replacement of power modules without shutting down, reducing maintenance time.
9. Application Fields
Power plant: used for condition monitoring of key equipment such as steam turbines and generators.
Petrochemical industry: used for vibration monitoring of rotating machinery such as compressors and pumps.
Steel metallurgy: used for fault warning of equipment such as rolling mills and fans.
Water treatment: used for monitoring the operating status of equipment such as water pumps and valves.
10. Precautions
Pre installation inspection: Ensure that the input voltage matches the rated voltage range of the power module.
Grounding requirements: Proper grounding is necessary to ensure equipment safety and electromagnetic compatibility.
Maintenance suggestion: Regularly check the working status of the power module to ensure the normal operation of the fan and avoid overheating.
Reviews
There are no reviews yet.